Face of Reinforced Perforated Panel Floor	Face of Reinforced Perforated Panel Floor	Face of HDG Perforated Panel Floor
Bottom of Reinforced PerforatedPanel Floor	Bottom of Reinforced PerforatedPanel Floor	Bottom of HDG Perforated Panel Floor

The atructure of ventilation floor is similar with that of anti-static full-steelraised floor but it has hollow cavity without foam stuffing.The upper and lower steel paltes and upper cover of the floor are all punched with ventilation holes.Matched with the 　　full-steelraised floor,the ventilation raised floor is used in the place where ventilation is requiredunder the floor,and the ventilationrate of the floor is 17%-36%.

Technical parameter of HDG anti-electrostatic whole steel overhead elevated Flow Panel

Type		（mm） Size	Concentrated Load (deflection=2mm)			(N/M2) Uniform Load	（N) Ultimate limit Load
International	National Standard SJ/T10796		lb	N	kg
AS450-TF	HDG600 30CQ	600×600×30	≥450	≥1960	≥200	≥8850	≥5900	≤17%
AS680-TF	HDG600 35QD	600×600×35	≥680	≥2950	≥300	≥12500	≥8250	≤25%
AS800-TF	HDG600 35QD	600×600×35	≥800	≥3550	≥360	≥15000	≥10650	≤25%
AS1000-TF	HDG600 35BD	600×600×35	≥1000	≥4450	≥450	≥23000	≥13350	≤36%

Notice: 1. It can arbitrary select the laying height of elevated floor.

　　　 2. The decorating surface of anti-electrostatic has high wearable melamine wainscot and PVC wainscot of made in
China , joint venture and export.

　　　 3. The carrying capacity of pedestal is over 20KN and can match with every type of elevated floor.